Inspired by others on the web who have posted pictures of their creations, I set out to build an outboard stand to store my small outboard during the winter months. I wanted something that would allow the gas tank and accessories to be stored underneath, and I wanted wheels so I could push it around. My materials included scrap 2x4s, 2x6s, plywood, a few lag screws, and some construction screws. I think the only things that needed to be purchased were four casters. Rather than show a set of plans which may or may not work for your size of outboard, here are some pictures that should give a pretty good idea of how this project was constructed. Measure your outboard and the other items you want to store, and build yours accordingly. Note: you should reinforce the uprights with some angled pieces if you have a heavier motor than my little 7.5hp Honda.
Outboard motor stand made from 2x6s, 2x4s, and plywood.
Casters are mounted on a block screwed to the inside of each corner of the unit.
Front view of outboard stand showing angle and mounting of top board.
Side view of outboard stand. Note platform on bottom is generous enough to hold gas tank, battery box, etc. for storage.
